Monday, September 17, 2012
Hardware Specifications SuperPro 3070
Hardware Specifications
ISP cable accommodates I2C, SPI, UART, BDM, MON, MW, JTAG, CAN, ICC, RS232 interfaces.
Cable driver circuit supports target voltage level of 1.5-5V and is also ESD protected.
USB 2.0 interface for PC connection and management of project files on SD card.
SuperPro 3070 Detailed Features
Detailed Features
Supports 6796 IC devices from 144 manufacturers and continuing
High speed ARM9 CPU based hardware engine. Programming speed adjustable for complicated application environments brought by user target board.
Supports ISP programming of devices with I2C, SPI, CAN, UART, BDM, MW, JTAG, or any other serial port.
Internal Linux O/S.
Two operation modes: Stand-alone and PC-Host mode.
DLL, API or Virtual Com communication command set available for third party application (Optional).
USB 2.0 interface to PC for data communication and control.
Over-current and ESD protection to protect your equipment.
Comes with one-year free device update request support unless there is no PCB testing (engineering labor) involved
Over-current protection circuit limits power to the target device.
Serial number is written within the built-in flash memory, which will be displayed when powered on.
SuperPro 3070
SuperPro 3070 is developed based on IS01 In-System Programmer. It is designed for Agilent Medalist i3070 Mux System .The features are very similar to IS01. The user may create project files with IS01 Software, and then operate the programmer through i3070 Mux System.
SuperPro 3070
SuperPro 3070 is developed based on IS01 In-System Programmer. It is designed for Agilent Medalist i3070 Mux System .The features are very similar to IS01. The user may create project files with IS01 Software, and then operate the programmer through i3070 Mux System.
Detailed Features
Supports 6796 IC devices from 144 manufacturers and continuing
High speed ARM9 CPU based hardware engine. Programming speed adjustable for complicated application environments brought by user target board.
Supports ISP programming of devices with I2C, SPI, CAN, UART, BDM, MW, JTAG, or any other serial port.
Internal Linux O/S.
Two operation modes: Stand-alone and PC-Host mode.
DLL, API or Virtual Com communication command set available for third party application (Optional).
USB 2.0 interface to PC for data communication and control.
Over-current and ESD protection to protect your equipment.
Comes with one-year free device update request support unless there is no PCB testing (engineering labor) involved
Over-current protection circuit limits power to the target device.
Serial number is written within the built-in flash memory, which will be displayed when powered on.
Hardware Specifications
ISP cable accommodates I2C, SPI, UART, BDM, MON, MW, JTAG, CAN, ICC, RS232 interfaces.
Cable driver circuit supports target voltage level of 1.5-5V and is also ESD protected.
USB 2.0 interface for PC connection and management of project files on SD card.
Software Specifications
Supports 5,000+ serial devices.
Supports Jam and Staple files from ACTEL and ALTERA; Direct C files from ACTEL.
Programming speed is selectable (High, Normal and Low) for compatibility with target environment and cable length
Dynamic buffer function. Application examples include: device serial number, MAC address, frequency or transducer calibration, etc.
File format on SD card: FAT16, FAT32
Functions for IP protection: Project security, SD card security, batch control, administration management, etc.
API and DLL are available for easy integration into customer systems such as ICT or ATE (option).
Multiple unit operation via USB Hub
Application
R&D applications like in-circuit tests and debugging.
Volume production- Devices may be programmed after the board is fully assembled. One example is writing the serial number to an on-board serial device.
Field application- Comes with portability, stand-alone mode, and an SD card. It is suitable for field tests, debugging and data acquisition.
Detailed Features
Supports 6796 IC devices from 144 manufacturers and continuing
High speed ARM9 CPU based hardware engine. Programming speed adjustable for complicated application environments brought by user target board.
Supports ISP programming of devices with I2C, SPI, CAN, UART, BDM, MW, JTAG, or any other serial port.
Internal Linux O/S.
Two operation modes: Stand-alone and PC-Host mode.
DLL, API or Virtual Com communication command set available for third party application (Optional).
USB 2.0 interface to PC for data communication and control.
Over-current and ESD protection to protect your equipment.
Comes with one-year free device update request support unless there is no PCB testing (engineering labor) involved
Over-current protection circuit limits power to the target device.
Serial number is written within the built-in flash memory, which will be displayed when powered on.
Hardware Specifications
ISP cable accommodates I2C, SPI, UART, BDM, MON, MW, JTAG, CAN, ICC, RS232 interfaces.
Cable driver circuit supports target voltage level of 1.5-5V and is also ESD protected.
USB 2.0 interface for PC connection and management of project files on SD card.
Software Specifications
Supports 5,000+ serial devices.
Supports Jam and Staple files from ACTEL and ALTERA; Direct C files from ACTEL.
Programming speed is selectable (High, Normal and Low) for compatibility with target environment and cable length
Dynamic buffer function. Application examples include: device serial number, MAC address, frequency or transducer calibration, etc.
File format on SD card: FAT16, FAT32
Functions for IP protection: Project security, SD card security, batch control, administration management, etc.
API and DLL are available for easy integration into customer systems such as ICT or ATE (option).
Multiple unit operation via USB Hub
Application
R&D applications like in-circuit tests and debugging.
Volume production- Devices may be programmed after the board is fully assembled. One example is writing the serial number to an on-board serial device.
Field application- Comes with portability, stand-alone mode, and an SD card. It is suitable for field tests, debugging and data acquisition.
Thursday, September 13, 2012
xeltek SuperPro 5000
xeltek SuperPro 5000 Universal IC Chip Device Programmer
SKU SP5K
Weight 7.00 lbs
Number of Devices Supported 83,100+
Number of Manufacturers Supported 297
Number of Pins Available 144
Stand-Alone (PC-Free) Yes
Built-in Processor ARM7 RISC MCU
Free User Requested Device Update Yes
Windows Support Win XP/Vista/7 32/64 bit
RoHS & CE Compliance Yes
Warranty 2 Years
Highlights
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
Ultra-Fast Programming Speed: Programs and verifies 64 Mb NOR Flash memory in 11.3 seconds and 1 Gb NAND Flash in 108 seconds.
Built-in 144 universal pin drivers
Comes with free device update request support within the warranty period.
CE and RoHS Compliant
Expanded Features
Programs devices with Vcc as low as 1.2V.
Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 1 GB NAND in 108 seconds.
Built with 144 universal pin-drivers for support of today's most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
Under stand-alone mode, the user controls the programmer via
20-characters, 4-line LCD display with 6-KEY
A CF (compact flash) card stores the project files.
ISP/ICP programming capability through optional ISP/ICP adapter.
In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows 7 & Vista & XP 32/64 bit
Only IC manufacturer approved programming algorithms provide high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Includes the following advanced and powerful software functions:
Chip operation starts immediately upon proper chip insertion in Production Mode.
Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
Password protection provides security for project files and production volume control.
Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial number generators are available as standard or customer-specific functions.
Log file provides production quality tracking.
Hardware & electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
Main unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)
Package: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)
Items Included
SuperPro 5000 Programmer with a DIP48 Adapter
AC adapter
Software CD
USB Cable
Optional Accessories:
Socket Adapters in various packages
CF card for stand-alone operation
ISP Header for serial programming
SKU SP5K
Weight 7.00 lbs
Number of Devices Supported 83,100+
Number of Manufacturers Supported 297
Number of Pins Available 144
Stand-Alone (PC-Free) Yes
Built-in Processor ARM7 RISC MCU
Free User Requested Device Update Yes
Windows Support Win XP/Vista/7 32/64 bit
RoHS & CE Compliance Yes
Warranty 2 Years
Highlights
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
Ultra-Fast Programming Speed: Programs and verifies 64 Mb NOR Flash memory in 11.3 seconds and 1 Gb NAND Flash in 108 seconds.
Built-in 144 universal pin drivers
Comes with free device update request support within the warranty period.
CE and RoHS Compliant
Expanded Features
Programs devices with Vcc as low as 1.2V.
Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 1 GB NAND in 108 seconds.
Built with 144 universal pin-drivers for support of today's most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
Under stand-alone mode, the user controls the programmer via
20-characters, 4-line LCD display with 6-KEY
A CF (compact flash) card stores the project files.
ISP/ICP programming capability through optional ISP/ICP adapter.
In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows 7 & Vista & XP 32/64 bit
Only IC manufacturer approved programming algorithms provide high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Includes the following advanced and powerful software functions:
Chip operation starts immediately upon proper chip insertion in Production Mode.
Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
Password protection provides security for project files and production volume control.
Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial number generators are available as standard or customer-specific functions.
Log file provides production quality tracking.
Hardware & electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
Main unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)
Package: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)
Items Included
SuperPro 5000 Programmer with a DIP48 Adapter
AC adapter
Software CD
USB Cable
Optional Accessories:
Socket Adapters in various packages
CF card for stand-alone operation
ISP Header for serial programming
Highlight of 7000
Ultra-Fast Programming Speed: Programs 30% faster than SuperPro 5000 programmers
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
The programmer support devices up to 256 GBytes.
Built-in 144 universal pin drivers
Comes with one-year free device update request support.
CE and RoHS Compliant
Expanded Features OF 7000
Expanded Features
Programs devices with Vcc as low as 1.2V.
Ultra fast programming speed: Programs 30% faster than SuperPro 5000 programmers
Built with 144 universal pin-drivers for support of today's most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY
A CF (compact flash) card stores the project files.
The programmer support devices up to 256 GBytes
ISP/ICP programming capability through optional ISP/ICP adapter.
In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows 7 & Vista & XP 32/64 bit
Only IC manufacturer approved programming algorithms provide high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Includes the following advanced and powerful software functions:
Chip operation starts immediately upon proper chip insertion in Production Mode.
Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
Password protection provides security for project files and production volume control.
Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial number generators are available as standard or customer-specific functions.
Log file provides production quality tracking.
Programs devices with Vcc as low as 1.2V.
Ultra fast programming speed: Programs 30% faster than SuperPro 5000 programmers
Built with 144 universal pin-drivers for support of today's most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY
A CF (compact flash) card stores the project files.
The programmer support devices up to 256 GBytes
ISP/ICP programming capability through optional ISP/ICP adapter.
In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows 7 & Vista & XP 32/64 bit
Only IC manufacturer approved programming algorithms provide high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Includes the following advanced and powerful software functions:
Chip operation starts immediately upon proper chip insertion in Production Mode.
Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
Password protection provides security for project files and production volume control.
Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial number generators are available as standard or customer-specific functions.
Log file provides production quality tracking.
Hardware & Electrical Specifications OF 7000
Hardware & Electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc...
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/1.5A; Power:15W
Main unit: Dimensions 184(L) * 160(W) * 78(h) mm; Weight 1.8 lbs (0.8 Kg)
Package: Dimensions 310(L) * 250(W) * 145(H) mm; Weight 3.6 lbs (1.65 Kg)
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc...
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/1.5A; Power:15W
Main unit: Dimensions 184(L) * 160(W) * 78(h) mm; Weight 1.8 lbs (0.8 Kg)
Package: Dimensions 310(L) * 250(W) * 145(H) mm; Weight 3.6 lbs (1.65 Kg)
xeltek SuperPro 7000 Programmer
xeltek SuperPro 7000 Programmer
Ultra-Fast Programming Speed: Programs 30% faster than SuperPro 5000 programmers
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
The programmer support devices up to 256 GBytes.
Built-in 144 universal pin drivers
Comes with one-year free device update request support.
CE and RoHS Compliant
Expanded Features
Programs devices with Vcc as low as 1.2V.
Ultra fast programming speed: Programs 30% faster than SuperPro 5000 programmers
Built with 144 universal pin-drivers for support of today's most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY
A CF (compact flash) card stores the project files.
The programmer support devices up to 256 GBytes
ISP/ICP programming capability through optional ISP/ICP adapter.
In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows 7 & Vista & XP 32/64 bit
Only IC manufacturer approved programming algorithms provide high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Includes the following advanced and powerful software functions:
Chip operation starts immediately upon proper chip insertion in Production Mode.
Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
Password protection provides security for project files and production volume control.
Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial number generators are available as standard or customer-specific functions.
Log file provides production quality tracking.
Hardware & Electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc...
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/1.5A; Power:15W
Main unit: Dimensions 184(L) * 160(W) * 78(h) mm; Weight 1.8 lbs (0.8 Kg)
Package: Dimensions 310(L) * 250(W) * 145(H) mm; Weight 3.6 lbs (1.65 Kg)
Items Included
SuperPro 7000 Programmer with a DIP48 Adapter
AC adapter
Software CD
USB Cable
Optional Accessories:
Socket Adapters in various packages
CF card for stand-alone operation
ISP Header for serial programming
Ultra-Fast Programming Speed: Programs 30% faster than SuperPro 5000 programmers
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
The programmer support devices up to 256 GBytes.
Built-in 144 universal pin drivers
Comes with one-year free device update request support.
CE and RoHS Compliant
Expanded Features
Programs devices with Vcc as low as 1.2V.
Ultra fast programming speed: Programs 30% faster than SuperPro 5000 programmers
Built with 144 universal pin-drivers for support of today's most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY
A CF (compact flash) card stores the project files.
The programmer support devices up to 256 GBytes
ISP/ICP programming capability through optional ISP/ICP adapter.
In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows 7 & Vista & XP 32/64 bit
Only IC manufacturer approved programming algorithms provide high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Includes the following advanced and powerful software functions:
Chip operation starts immediately upon proper chip insertion in Production Mode.
Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
Password protection provides security for project files and production volume control.
Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial number generators are available as standard or customer-specific functions.
Log file provides production quality tracking.
Hardware & Electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc...
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/1.5A; Power:15W
Main unit: Dimensions 184(L) * 160(W) * 78(h) mm; Weight 1.8 lbs (0.8 Kg)
Package: Dimensions 310(L) * 250(W) * 145(H) mm; Weight 3.6 lbs (1.65 Kg)
Items Included
SuperPro 7000 Programmer with a DIP48 Adapter
AC adapter
Software CD
USB Cable
Optional Accessories:
Socket Adapters in various packages
CF card for stand-alone operation
ISP Header for serial programming
Monday, September 10, 2012
ATxmega384D3 MCU code extraction
ATxmega384D3 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance, low-power 8/16-bit AVR XMEGA
microcontroller combines 384KB in-system programmable flash
memory (8KB boot code section) with read-while-write
capabilities, 4KB EEPROM, 32KB SRAM, a four-channel event
system, a programmable multi-level interrupt controller, 50
general purpose I/O lines, a 16-bit real time counter, five
flexible 16-bit timer/counters with compare, compare and PWM
channels, three USARTs, two two-wire interfaces, two serial
peripheral interfaces, one 16-channel/12-bit ADC programmable
gain, two analog comparators with window mode, a programmable
watchdog timer with separate internal oscillator, accurate
internal oscillators with PLL and prescaler, and a programmable
brown-out detection.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance, low-power 8/16-bit AVR XMEGA
microcontroller combines 384KB in-system programmable flash
memory (8KB boot code section) with read-while-write
capabilities, 4KB EEPROM, 32KB SRAM, a four-channel event
system, a programmable multi-level interrupt controller, 50
general purpose I/O lines, a 16-bit real time counter, five
flexible 16-bit timer/counters with compare, compare and PWM
channels, three USARTs, two two-wire interfaces, two serial
peripheral interfaces, one 16-channel/12-bit ADC programmable
gain, two analog comparators with window mode, a programmable
watchdog timer with separate internal oscillator, accurate
internal oscillators with PLL and prescaler, and a programmable
brown-out detection.
ATxmega384C3 MCU code extraction
ATxmega384C3 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance, low-power 8/16-bit AVR XMEGA
microcontroller combines 384KB in-system programmable flash
memory (8KB boot code section) with read-while-write
capabilities, 4KB EEPROM, 32KB SRAM, a two-channel DMA
controller, a four-channel event system, a programmable multi-
level interrupt controller, 50 general purpose I/O lines, a 16-
bit real time counter, five flexible 16-bit timer/counters with
compare, compare and PWM channels, USB Full-speed Device, three
USARTs, two two-wire interfaces, two serial peripheral
interfaces, one 16-channel/12-bit ADC programmable gain, two
analog comparators with window mode, a programmable watchdog
timer with separate internal oscillator, accurate internal
oscillators with PLL and prescaler, and a programmable brown-out
detection.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance, low-power 8/16-bit AVR XMEGA
microcontroller combines 384KB in-system programmable flash
memory (8KB boot code section) with read-while-write
capabilities, 4KB EEPROM, 32KB SRAM, a two-channel DMA
controller, a four-channel event system, a programmable multi-
level interrupt controller, 50 general purpose I/O lines, a 16-
bit real time counter, five flexible 16-bit timer/counters with
compare, compare and PWM channels, USB Full-speed Device, three
USARTs, two two-wire interfaces, two serial peripheral
interfaces, one 16-channel/12-bit ADC programmable gain, two
analog comparators with window mode, a programmable watchdog
timer with separate internal oscillator, accurate internal
oscillators with PLL and prescaler, and a programmable brown-out
detection.
ATxmega32D4 MCU code extraction
ATxmega32D4 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance, low-power 8/16-bit AVR XMEGA
microcontroller combines 32KB ISP flash memory (4KB boot code
section) with read-while-write capabilities, 1KB EEPROM, 4KB
SRAM, four-channel event system, a programmable multi-level
interrupt controller, 34 general purpose I/O lines, a 16-bit
real time counter, four flexible 16-bit timer/counters with
compare modes and PWM, two USARTs, two Two-Wire Interfaces
(TWIs), two Serial Peripheral Interfaces (SPIs), one 12-
channel/12-bit A/D converter with optional differential input
with programmable gain, two analog comparators with window mode,
a programmable watchdog timer with separate internal oscillator,
accurate internal oscillators with PLL and prescaler, and
programmable brown-out detection. The Program and Debug
Interface (PDI), a fast 2-pin interface for programming and
debugging, is available. By executing powerful instructions in a
single clock cycle, the device achieves throughputs approaching
1 MIPS per MHz, balancing power consumption and processing
speed.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance, low-power 8/16-bit AVR XMEGA
microcontroller combines 32KB ISP flash memory (4KB boot code
section) with read-while-write capabilities, 1KB EEPROM, 4KB
SRAM, four-channel event system, a programmable multi-level
interrupt controller, 34 general purpose I/O lines, a 16-bit
real time counter, four flexible 16-bit timer/counters with
compare modes and PWM, two USARTs, two Two-Wire Interfaces
(TWIs), two Serial Peripheral Interfaces (SPIs), one 12-
channel/12-bit A/D converter with optional differential input
with programmable gain, two analog comparators with window mode,
a programmable watchdog timer with separate internal oscillator,
accurate internal oscillators with PLL and prescaler, and
programmable brown-out detection. The Program and Debug
Interface (PDI), a fast 2-pin interface for programming and
debugging, is available. By executing powerful instructions in a
single clock cycle, the device achieves throughputs approaching
1 MIPS per MHz, balancing power consumption and processing
speed.
Friday, September 7, 2012
AT32UC3L0256 MCU code extraction
AT32UC3L0256 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance 32-bit AVR microcontroller is designed for
cost-sensitive embedded applications that require low power
consumption, high code density, and high performance.
The microcontroller's Memory Protection Unit (MPU) and fast,
flexible interrupt controller support the latest real-time
operating systems. The Secure Access Unit (SAU) with MPU provide
enhanced security and integrity. Higher computation capability
is achieved using a rich set of DSP instructions.
The microcontroller embeds state-of-the-art picoPower technology
for ultra-low power consumption. A combination of power control
techniques bring active current consumption down to 165µA/MHz
and leakage down to 9nA while still retaining a bank of backup
registers. The device offers a wide range of trade-offs between
functionality and power consumption to reach the lowest possible
power usage for the application's required feature set.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance 32-bit AVR microcontroller is designed for
cost-sensitive embedded applications that require low power
consumption, high code density, and high performance.
The microcontroller's Memory Protection Unit (MPU) and fast,
flexible interrupt controller support the latest real-time
operating systems. The Secure Access Unit (SAU) with MPU provide
enhanced security and integrity. Higher computation capability
is achieved using a rich set of DSP instructions.
The microcontroller embeds state-of-the-art picoPower technology
for ultra-low power consumption. A combination of power control
techniques bring active current consumption down to 165µA/MHz
and leakage down to 9nA while still retaining a bank of backup
registers. The device offers a wide range of trade-offs between
functionality and power consumption to reach the lowest possible
power usage for the application's required feature set.
AT32UC3L032 MCU code extraction
AT32UC3L032 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance 32-bit AVR microcontroller is designed for
cost-sensitive embedded applications that require low power
consumption, high code density, and high performance.
The microcontroller's Memory Protection Unit (MPU) and fast,
flexible interrupt controller support the latest real-time
operating systems. The Secure Access Unit (SAU) with MPU provide
enhanced security and integrity. Higher computation capability
is achieved using a rich set of DSP instructions.
The microcontroller embeds state-of-the-art picoPower technology
for ultra-low power consumption. A combination of power control
techniques bring active current consumption down to 165µA/MHz
and leakage down to 9nA while still retaining a bank of backup
registers. The device offers a wide range of trade-offs between
functionality and power consumption to reach the lowest possible
power usage for the application's required feature set.
AT32UC3L064 MCU code extraction
AT32UC3L064 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
The high-performance 32-bit AVR microcontroller is designed for cost-sensitive embedded applications that require low power consumption, high code density, and high performance.
The microcontroller's Memory Protection Unit (MPU) and fast, flexible interrupt controller support the latest real-time operating systems. The Secure Access Unit (SAU) with MPU provide enhanced security and integrity. Higher computation capability is achieved using a rich set of DSP instructions.
The microcontroller embeds state-of-the-art picoPower technology for ultra-low power consumption. A combination of power control techniques bring active current consumption down to 165µA/MHz and leakage down to 9nA while still retaining a bank of backup registers. The device offers a wide range of trade-offs between functionality and power consumption to reach the lowest possible power usage for the application's required feature set.
AT80C51RD2 MCU code extraction
AT80C51RD2 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
High-performance version of the 80C51 8-bit microcontrollers that retains all features of the 80C52 adn adds programmable counter array, 1024 bytes of XRAM, hardware watchdog timer, keyboard interface, versatile serial channel that facilitates multiprocessor communication (EUART), and a speed improvement mechanism (X2 mode).
The device has two software-selectable modes of reduced activity and an 8-bit clock prescaler to further reduce power consumption. In idle mode, the CPU is frozen while the peripherals and the interrupt system operate. In the power-down mode, the RAM is saved and all other functions are inoperative.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
High-performance version of the 80C51 8-bit microcontrollers that retains all features of the 80C52 adn adds programmable counter array, 1024 bytes of XRAM, hardware watchdog timer, keyboard interface, versatile serial channel that facilitates multiprocessor communication (EUART), and a speed improvement mechanism (X2 mode).
The device has two software-selectable modes of reduced activity and an 8-bit clock prescaler to further reduce power consumption. In idle mode, the CPU is frozen while the peripherals and the interrupt system operate. In the power-down mode, the RAM is saved and all other functions are inoperative.
AT83C5134 MCU code extraction
AT83C5134 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
High-performance ROM version of the 80C51 single-chip, 8-bit microcontroller with full-speed USB functions. It is pin-compatible with AT89C5130A 16-KB and AT89C5131A 32-KB ISP flash microcontrollers, allowing those devices be used for development and pre-production while this device can be used in mass production to reduce costs.
It features a full-speed USB module that is compatible with the USB specification version 2.0. This module integrates the USB transceivers and the serial interface engine with digital phase locked loop and 48-MHz clock recovery. It also includes USB event detection logic and FIFO buffers supporting the mandatory control endpoint and five versatile endpoints with minimum software overhead.
The device retains the features of the Atmel 80C52 and adds 1024 bytes of on-chip ERAM, a dual data pointer, a 16-bit up/down timer, a programmable counter array, up to four programmable LED current sources, a programmable hardware watchdog, and a power-on reset.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
High-performance ROM version of the 80C51 single-chip, 8-bit microcontroller with full-speed USB functions. It is pin-compatible with AT89C5130A 16-KB and AT89C5131A 32-KB ISP flash microcontrollers, allowing those devices be used for development and pre-production while this device can be used in mass production to reduce costs.
It features a full-speed USB module that is compatible with the USB specification version 2.0. This module integrates the USB transceivers and the serial interface engine with digital phase locked loop and 48-MHz clock recovery. It also includes USB event detection logic and FIFO buffers supporting the mandatory control endpoint and five versatile endpoints with minimum software overhead.
The device retains the features of the Atmel 80C52 and adds 1024 bytes of on-chip ERAM, a dual data pointer, a 16-bit up/down timer, a programmable counter array, up to four programmable LED current sources, a programmable hardware watchdog, and a power-on reset.
AT83C5135 MCU code extraction
AT83C5135 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
High-performance ROM version of the 80C51 single-chip, 8-bit microcontroller with full-speed USB functions. It is pin-compatible with AT89C5130A 16-KB and AT89C5131A 32-KB ISP flash microcontrollers, allowing those devices be used for development and pre-production while this device can be used in mass production to reduce costs.
It features a full-speed USB module that is compatible with the USB specification version 2.0. This module integrates the USB transceivers and the serial interface engine with digital phase locked loop and 48-MHz clock recovery. It also includes USB event detection logic and FIFO buffers supporting the mandatory control endpoint and five versatile endpoints with minimum software overhead.
The device retains the features of the Atmel 80C52 and adds 1024 bytes of on-chip ERAM, a dual data pointer, a 16-bit up/down timer, a programmable counter array, up to four programmable LED current sources, a programmable hardware watchdog, and a power-on reset.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
High-performance ROM version of the 80C51 single-chip, 8-bit microcontroller with full-speed USB functions. It is pin-compatible with AT89C5130A 16-KB and AT89C5131A 32-KB ISP flash microcontrollers, allowing those devices be used for development and pre-production while this device can be used in mass production to reduce costs.
It features a full-speed USB module that is compatible with the USB specification version 2.0. This module integrates the USB transceivers and the serial interface engine with digital phase locked loop and 48-MHz clock recovery. It also includes USB event detection logic and FIFO buffers supporting the mandatory control endpoint and five versatile endpoints with minimum software overhead.
The device retains the features of the Atmel 80C52 and adds 1024 bytes of on-chip ERAM, a dual data pointer, a 16-bit up/down timer, a programmable counter array, up to four programmable LED current sources, a programmable hardware watchdog, and a power-on reset.
AT83C5136 MCU code extraction
AT83C5136 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
High-performance ROM version of the 80C51 single-chip, 8-bit microcontroller with full-speed USB functions. It is pin-compatible with AT89C5130A 16-KB and AT89C5131A 32-KB ISP flash microcontrollers, allowing those devices be used for development and pre-production while this device can be used in mass production to reduce costs.
It features a full-speed USB module that is compatible with the USB specification version 2.0. This module integrates the USB transceivers and the serial interface engine with digital phase locked loop and 48-MHz clock recovery. It also includes USB event detection logic and FIFO buffers supporting the mandatory control endpoint and five versatile endpoints with minimum software overhead.
The device retains the features of the Atmel 80C52 and adds 1024 bytes of on-chip ERAM, a dual data pointer, a 16-bit up/down timer, a programmable counter array, up to four programmable LED current sources, a programmable hardware watchdog, and a power-on reset.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
High-performance ROM version of the 80C51 single-chip, 8-bit microcontroller with full-speed USB functions. It is pin-compatible with AT89C5130A 16-KB and AT89C5131A 32-KB ISP flash microcontrollers, allowing those devices be used for development and pre-production while this device can be used in mass production to reduce costs.
It features a full-speed USB module that is compatible with the USB specification version 2.0. This module integrates the USB transceivers and the serial interface engine with digital phase locked loop and 48-MHz clock recovery. It also includes USB event detection logic and FIFO buffers supporting the mandatory control endpoint and five versatile endpoints with minimum software overhead.
The device retains the features of the Atmel 80C52 and adds 1024 bytes of on-chip ERAM, a dual data pointer, a 16-bit up/down timer, a programmable counter array, up to four programmable LED current sources, a programmable hardware watchdog, and a power-on reset.
AT83EB5114 MCU code extraction
AT83EB5114 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
Dedicated to lighting control applications, this device retains all the features of the standard 80C51 with 4KB of ROM program memory, 256 bytes RAM, 256 bytes EEPROM, a 7-source, 4-level interrupt system, an on chip oscillator and two timers/counters.
Analog functions include a 10-bit, 6-channel A/D converter and two optimized PWM units.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
Dedicated to lighting control applications, this device retains all the features of the standard 80C51 with 4KB of ROM program memory, 256 bytes RAM, 256 bytes EEPROM, a 7-source, 4-level interrupt system, an on chip oscillator and two timers/counters.
Analog functions include a 10-bit, 6-channel A/D converter and two optimized PWM units.
AT86RF212 MCU code extraction
AT86RF212 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
Low-power, low-voltage 700/800/900MHz transceiver designed for low-cost IEEE 802.15.4, ZigBee and high data rate ISM applications available in China, Europe and North America. The transceiver offers an extreme 120 dB link budget (-110 dBm receiver sensitivity / +10 dBm transmit power). It is a true SPI-to-antenna solution providing a complete radio transceiver interface between the antenna and the microcontroller. MAC and AES hardware accelerators improve overall system power efficiency and timing.
It comprises the analog radio transceiver and the digital demodulation including time and frequency synchronization, and data buffering. All RF-critical components are integrated on a single chip minimizing the number of required external components to the antenna, crystal and decoupling capacitors. The bidirectional differential antenna pins, used for transmission and reception, eliminate the need for an external antenna switch.
An internal 128 byte RAM buffers transmit and receive data. Two on chip low dropout (LDO) voltage regulators provide the internal analog and digital 1.8V supply.
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
Low-power, low-voltage 700/800/900MHz transceiver designed for low-cost IEEE 802.15.4, ZigBee and high data rate ISM applications available in China, Europe and North America. The transceiver offers an extreme 120 dB link budget (-110 dBm receiver sensitivity / +10 dBm transmit power). It is a true SPI-to-antenna solution providing a complete radio transceiver interface between the antenna and the microcontroller. MAC and AES hardware accelerators improve overall system power efficiency and timing.
It comprises the analog radio transceiver and the digital demodulation including time and frequency synchronization, and data buffering. All RF-critical components are integrated on a single chip minimizing the number of required external components to the antenna, crystal and decoupling capacitors. The bidirectional differential antenna pins, used for transmission and reception, eliminate the need for an external antenna switch.
An internal 128 byte RAM buffers transmit and receive data. Two on chip low dropout (LDO) voltage regulators provide the internal analog and digital 1.8V supply.
AT86RF230 MCU code extraction
AT86RF230 MCU code extraction, Chip decryption, MCU code
extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB
copying.
Low-power 2.4GHz transceiver designed for low cost IEEE802.15.4, ZigBee, RF4CE, SP100, WirelessHART™ and ISM applications. It is a true SPI-to-antenna solution providing a complete radio transceiver interface between the antenna and the microcontroller.
It comprises the analog radio transceiver and the digital demodulation including time and frequency synchronization, and data buffering. All RF-critical components are integrated on a single chip minimizing the number of required external components to the antenna, crystal and decoupling capacitors. The bidirectional differential antenna pins, used for transmission and reception, eliminate the need for an external antenna switch.
An internal 128 byte RAM buffers transmit and receive data. Two on chip low dropout (LDO) voltage regulators provide the internal analog and digital 1.8V supply.
Subscribe to:
Posts (Atom)